This 26" 1000W Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike, which delivers unequaled performance and reliability. You’ll be out cruising along at 28mph (45km/h) without a sweat!
Key feature:
* Built to the highest international standards, CE, EN15194
* 48V 1000W and 250W super power brushless gearless hub motor
* Restricted to 250W and 16 mph by default as a road-legal kit
* Nylon tire& alloy rim& galvanized steel spoke
* Rare-earth metal magnet are used in the motor to efficiently produce large power
* Aluminum alloy powerful controller guarantee big current supply
* Adjustable 5 level intelligent pedal assist with twist throttle
* Brake Levers cut off the power supply to the motor safely
* Crank speed sensor for pedal assist
* Aluminum alloy powerful controller
Upgraded Intelligent Motor Controller:
* Allow you to swap two power modes between the full 1000W power or 250W power by a single blue switch wire is embedded in controller.(Only for Twist Throttle)
* Still remain the full 1000W power with no speed control.(Only for Pedal Assist System,"PAS")
SPECIFICATIONS:
Wheel type: Rear Wheel
Motor: Brushless Gearless
Tire Material: Nylon
Rim Material: Double Wall Alloy
Power: 1000W / 48V or 250W / 48V
Spokes: Steel, 12G×2.6mm, 36pcs
Max speed: 28 mph or 16 mph (45km/h or 25km/h)
Wheel Size: 26" (660mm)
Rim Diameter: 22.56" (573mm)
Tyre Size: 26" x 1.95"
Rear Dropout: 5.3" (135mm)
Wheel Axle: 8.27" (210 x Φ10mm)
Torque: 45 N.M
Max load capacity: 440 LBS
Net weight:10.5kg
Package Include:
1x Brushless Gearless Motor Rear Wheel
1x Intelligent Motor Controller
1x Pedal Assist Crank Sensor
1x Cable Ties & Plastic Coil
1x Pair of Handle Bars (included Twist Throttle)
1x Controller Bag
1x Pair of Brake Handles
1x Manual
1x 7 Speed Freewheel (Not Installed)
1x Tyre (Not Installed)
Note:
1.The system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah.
2.Battery and charger are not included in package.
3.The AU regulations dictate that a kit must not exceed the rated power of 250W to be road-legal!
So please connecting the Road-legal Switch Wire and disconnect the PAS on Road.
Caution: For your Safety, Please turn off the battery before connecting the Controller!